Top

HOW TO ~ Fill your flask without spilling a drop!

Sven was out pounding the pavement yesterday and one of our local bicycle dealers slash fat hyphen dot com readers suggested that we do more ({[HOW TO]}) stories right here in on the interwebs, so here we go….

Fat-Bikers seem to have made the stainless steel flask standard equipment on their mounts across the world, so we thought in the interest of abating alchohol abuse (spillage), we would fill you in – on the best way to fill your flask – without spilling a drop.

What You’ll Need

Flask (Empty)

Liquid Measuring Cup or Graduated Cylinder (if you wanna get all mad scientist)

Water

Boozahol

A tiny funnel – or a steady hand

 

The Process

Fill the empty flask with water. It’s ok to spill a little to get the flask filled to the shoulders. Fill it right up to the bottom of the drinking spout.

Empty the water from your flask into the measuring cup.

Take an accurate measurment of your flask’s liquid volume. Then drink the water.

Measure out your choice of Alcha-hoozie – Peppermint Schnapps for me!

With a steady hand, fill your flask with care. You could use a tiny funnel, if you want here to insure against spillage.

And there you have it!…..a flask to share with amigos, when things get all stressful out on the tundra!

, , , , , , , , ,

5 Responses to HOW TO ~ Fill your flask without spilling a drop!

  1. Patrick December 29, 2012 at 5:39 pm #

    This is great, never thought of it before. Just tried it and worked perfectly! Thanks!

  2. ErvSpanks January 20, 2016 at 6:35 pm #

    YES! Awesome how-to! This is life skills type stuff people!

  3. Sean January 21, 2016 at 2:39 pm #

    I’ve had good success using a large syringe, such as the one sold by Stan’s for pushing sealant into a valve stem. Clean it first however…

  4. Sandy July 3, 2016 at 6:23 pm #

    I had a very wide drinking straw and a tiny funnel and it worked great. Measuring in advance is brilliant.

Leave a Reply to Sandy Click here to cancel reply.