Top

Interbike Day 3 On the Show Floor – Part 2

Lots of action in the fat-bike space at the show on Wednesday. Here are more pix of what we saw. Many of these pictures are of prototypes or early production items. Look for more info on all these products in the coming weeks as we learn more about availability, final specs and pricing.

Vee Tire Co's Snowshoe is a new 4.7 x 26" fat-bike tire!

Vee Tire Co’s Snowshoe is a new 4.7 x 26″ fat-bike tire!

Vee Tire Co is the new name of what was previously called the Vee Rubber Company. In addition, the new graphics look great!

Tread pattern of the 4.7 x 26" Snowshoe from Vee Tire.

Tread pattern of the 4.7 x 26″ Snowshoe from Vee Tire.

 

Boo Bicycles showed their new Aluminum/Bamboo fat-bike.

Boo Bicycles showed their new Aluminum/Bamboo fat-bike.

 

Boo headtube.

Boo headtube.

 

Boo fat-bike aluminum seat cluster.

Boo fat-bike aluminum seat cluster.

 

Phil Wood 135mm front hub is available in both Front specific disc spacing as well as the older Rear disc spacing standard.

Phil Wood 135mm front hub is available in both Front specific disc spacing as well as the older Rear disc spacing standard.

 

Phil Wood 170mm fat-bike hub with the SL cut out option.

Phil Wood 170mm fat-bike hub with the SL cut out option.

 

Bob showing the prototype of Stan's new tubeless compatible fat-bike rim that can be seated and inflated with a hand pump!

Bob showing the prototype of Stan’s new tubeless compatible fat-bike rim that can be seated and inflated with a hand pump!

 

Stan's prototype tubeless fat-bike rim. Initial rims will be 52mm and this proto weighed in at 485g.

Stan’s prototype tubeless fat-bike rim. Initial rims will be 52mm and this proto weighed in at 485g.

 

fat-bikes-at-interbike-2709

John is showing off X-Fusion’s fat-bike fork. The best of the best is in this baby and it should be available in about 6 months.

 

15mm thru axle of the X-Fusion fat-fork.

15mm thru axle of the X-Fusion fat-fork.

 

fat-bikes-at-interbike-2715

Risse’s Trixxy is available for fat-bikes and is a very reasonable $695 retail with a 120mm hub. A 135mm model is also available. Q/R and thru axle version as well!

 

See that modular swing arm? Imagine it with a wider yoke that can accommodate a fat-bike wheel because it is coming!

See that modular swing arm? Imagine it with a wider yoke that can accommodate a fat-bike wheel because it is coming!

 

Another shot of the soon to be fatter Risse swing arm.

Another shot of the soon to be fatter Risse swing arm.

 

Belt Drive Rohloff on a Krampus!

Belt Drive Rohloff on a Krampus!

 

Belt Drive Rohloff goodness.

Belt Drive Rohloff goodness.

 

Wonder what 14 gears in an Internally Geared Hub look like?

Wonder what 14 gears in an Internally Geared Hub look like?

 

Prototype of the Kinesis Aluminum Fat-bike fork. Minor changes and this is going into production.

Prototype of the Kinesis Aluminum Fat-bike fork. Minor changes and this is going into production.

 

I wonder what boot this might have been at?

I wonder what boot this might have been at?

 

287 fat-bike shown in a fat-bike compatible Rudy Rack.

287 fat-bike shown in a fat-bike compatible Rudy Rack.

 

17 Responses to Interbike Day 3 On the Show Floor – Part 2

  1. Tad Dickman September 19, 2013 at 9:18 am #

    Did X-Fusion give you any idea on the price of the Revel?

    Weight on the Risse?

    • Sven Haamer September 20, 2013 at 11:30 am #

      Ballpark here folks but the X-Fusion is in the $1899 range. When we get final, production numbers we’ll let you know! Look for it in about 6 months.

      The Risse can be set up several different ways most common is about 6 pounds.

  2. JYB September 19, 2013 at 9:47 am #

    That Stan’s rim has summertime funtime written all over it! Even if it was 500g in full production mode, I’d be into that. And my god that X-fusion fork is pretty sweet. I’ve heard nothing but good reports about X-fusion, but I have yet to ride any of their products.

  3. Chris D September 19, 2013 at 9:50 am #

    Steal that gold fork for me. Handsome reward.

  4. WyoRacerX September 19, 2013 at 11:11 am #

    I was hoping for Stans to go a tad wider to keep the same tire profile on my 4″ Escalators

    • Sven Haamer September 20, 2013 at 11:31 am #

      Once Stan’s does the 52mm version they will be working on a wider rim. Don’t discount the narrower rim though. With the lower sidewall of the rim tires behave a bit differently.

  5. Tony B. September 19, 2013 at 1:18 pm #

    Bring me back that Boo

    • Sven Haamer September 20, 2013 at 11:32 am #

      Sorry, Tony, you will just have to travel with me to Fort Collins! Should be a great trip!

  6. Mr Trystanpoo September 19, 2013 at 1:39 pm #

    Krampuuuuus oof, I’m sorry I have just ……oh I probably shouldn’t write that. Um self custardised?

  7. Frank September 19, 2013 at 10:12 pm #

    Stan: Add 30mm and call me back!

  8. JYB September 20, 2013 at 9:28 am #

    I think that the Stan’s rims are on the money. Anything between 47-60mm would be sweet for the majority of the year. It would rock if eventually they made a narrow (50-60mm at sub 500g) and a wider option. I’d buy both! I don’t see huge snowfall in VA, so I’d love to have a proper tubeless trail-worthy rim fo’ sho’.

  9. alex September 20, 2013 at 8:21 pm #

    That X-fusion fork looks awesome. Glad to see someone is making a fatbike suspension fork, even if i can’t afford it.

  10. Troll September 24, 2013 at 6:35 pm #

    Am I the only one that noticed the Snowshoe tire is being demo’d on a drilled out Mongoose Beast rim?

  11. Ted September 25, 2013 at 9:46 am #

    Stans should roll that 52mm rim to 29″ diamater.

  12. Ken Arnett November 14, 2013 at 5:13 pm #

    Lets hope that a Final rim is produced in the 75-85 mm range! Any update on availability?

  13. Aaron November 23, 2015 at 7:46 pm #

    Hey Sven, can you tell me if you know where I can get a replacement rear swingarm for a fatbike?
    Some drunk bastard backed into my bike and then ran over it, nearly folding the swingarm like a taco shell.
    I am sure it may also depend on brands and measurements, so I am actually hoping to find a cheap “universal” replacement if possible?
    Thanks

    • Sven Haamer November 24, 2015 at 11:00 am #

      I’m not aware of any universal swingarms. They are integral to the design of the bike and, without a lot of frankensteining, I think you’d need to get the one for the exact model bike you have. Even variations from year to year of the same model often have changes.

Leave a Reply to WyoRacerX Click here to cancel reply.